How to Make A Recurve Bow at Home – Advice For Beginners!

How to Make A Recurve Bow

Recurve bows have been gaining popularity within the last couple of decades. As a result, the sport of archery has become more and more competitive. A recurve bow is known for its curved design. The curved design allows for a more precise shot once the archer or shooter makes the shot. The shot itself becomes more dynamic and powerful, also. A recurve bow uses more potential energy that is then converted into kinetic energy than any other bow type. The recurve bow dates back to the middle ages, when it was thought to have been first used by Asian cultures. It is traditionally preferred by archers because of its ability to be used in competitions and because of its superb handling ability on areas such as forests and rocky terrains. Many experienced archers have often given recurve bow hunting tips so the beginner archer can perfect their shot with this exceptional bow type.

Recurve bows have a top, middle and bottom. Each area of the bow is made of materials that range from fiberglass to wood. The middle part of the recurve bow is known as the riser and more often that naught is made of a combination of materials that include aluminum and magnesium. Beginners who are seeking to make their own recurve bow have been noted as using plastic or wood in their creations. These materials are sometimes used in custom recurve bows as well. The recurve bow building process continues to be noted as being one of complex intricacy taking time to perfect. If you are seeking to build a recurve bow, it is recommended that you understand the steps perfectly before attempting to build one.

There are steps that should be followed in making a recurve bow and in how to string a recurve bow. They are as follows:

1. Wooden plank. The wooden plank is what the bow will be shaped from. When making the purchase, ensure that its dimensions are what you want the length of your bow to be. The wood needs to be durable and tough. This is key in the how to make a recurve bow process.

2. Gather these tools: an axe, a vice grip, a filing item, some clamps, a knife and a gun for heating. You will also need a frame that is planned explicitly for making bows. This will make the process simpler and calmer once you start.

3. Stand the plank up in one hand and with your other hand, use the ax. The piece of wood you are using to make your recurve bow should be very smooth on both sides. Try to make both sides as a smooth as you possibly can. The specifics of how you want your recurve bow to look needed to be decided ahead of time before you start making your recurve bow.

4. Decide where you want the handle of the bow to be and make a mark on the wooden plank.

5. Ensure that the wood you selected can bend. To do this, put the bottom part of the wooden plank against your inside leg and hold the upper part with one hand. Try to pull the piece of wood as far back as you can to test it.

6. Place the section where you decided to put the handle of your recurve bow into the vice you put aside earlier. Make sure the back of the wood you are using is facing towards you when you put the wood into the vice. Take the knife and draw on the piece of wood that is now in the vice grip.

7. Now comes shaping your bow. If the bow is somewhat cool to the touch, you can heat it with the heat gun. Put piece of wood into the frame you put aside for bow shaping. If you want an exact type of curve in the bow you are creating, you may have to move the bow to different areas of the frame.

8. Use the clamps to secure the flank into the bow frame. You may have to heat up the plank again if the piece of wood is not securing correctly into the frame. Once you have secured the plank into the frame, leave it there for a few hours. It is essential that this procedure be repeated for the top and bottom areas of the flank.

9. After letting the plank sit in the frame for a few hours, put what are called knocks into the bow tips. The knocks inhibit the recurve bow string from moving once it is securely on the bow. To do this, use the filing item that you set aside in your assemblage of equipment process earlier.

10. The final step in the process is to assemble your string. The progression can take a bit of time, so be patient. Once this process is finished, you can smooth the front part of the bow with the filing item to ensure that the bow is now to your liking.

There are many different variations in how to make a recurve bow as far as design and color, so have fun and make the process an enjoyable one. Once you have successfully made your recurve bow, go out and get a few recurve bow accessories to accompany your archery experience.

Related posts: