How To String A Recurve Bow

How To String A Recurve Bow – Secrets To Do It Right!

The recurve bow can be traced as far back as early Asia. The Asians were among the first group of individuals to put a double bend on their bows. The recurve bow is considered among many archery circles to be pure genius in its robust craftsmanship. Archers note the design as being simply a magic of physics as the recurve bow tends to provide a greater shot than traditional bow. Modern recurve bows provider the archer with more precision and accuracy for that matter, and is therefore the recommended choice for the novice beginning their archery journey as well as the veteran shooter who has been using many different types of bows for years. Recurve bows generally do not have additional parts like other bows which is the main reason it is the choice among archers in addition to its ability to shoot a precise shot that is fast in velocity. Recurve bows have ends that sweep back and then forward at the top areas near the grip area and bow string. This allows for an easier handling of the bow by the beginner.

Unlike other bows, the recurve bows do not have a letdown point, which allows the shooter to feel the weight they were using upon shooting the bow. Stringing a recurve bow is not a difficult task, just requires extra careful assembling of the string itself. It is recommended normally to use a recurve bow stringer when seeking to learn how string this type of bow.
Here are the steps that one should follow when learning how to string a recurve bow properly.

1. Ensure the bow for wear and tear is safe for usage. Perhaps the most important step in stringing a recurve bow and in any sport for that matter is to examine the equipment one is using to make sure it is safe for the person who will be using it.

2. Take a string and slip it on the lower half of the bow, while making a loop in the hand that you normally do not use. It is recommended to use your dominant hand in the case of stringing a recurve.

3. Hold the tip of the upper side of the bow with the hand you use the most.

4. Lay the other tip of the bow on your opposite foot. This is an essential step in the how to string a recurve bow process as well because the shooter is using hand and eye coordination in this step to ensure that the bow is being stringed correctly.

5. Take the leg you use the most, also called the dominant one, and push it through the bow and allow the bow to rest up against your thigh, pointing the curve on the bow away from you at the same time.

6. Push down gently on the bow to allow the recurve bow string to slip on successfully.

7. Release any pressure that may be still exerting itself on the bow and put all of it on the string. You can perform what is called a bowstrings test in order to ensure the string is secure on your recurve bow.

It is essential to the bow stringing process to ensure that the bow is safe to use. This is crucial, as splinters can be sent into the air if the bow is not secure or if there is breakage on it. Some archers opt to have custom bowstrings for their recurve bow. Certain manufacturers such as Winners Choice Strings, allow archer professionals and novices alike to order custom bow strings based on the year the bow was produced, color type, specific length of the string (i.e. bow buss cable length, bow string length, control cable length, etc). as well as the definitive type of bow make associated with the type of archery ranging from bear archery to Hoyt archery to Ross archery, the person using the bow practices.
Some archers may decide to string a recurve without a stringer. This is not usually optional, but there are steps in this process also.

1. Make a loop of the bowstring at the top end of the bow.

2. Twist the string allowing the loop to slide below the top part of the bow.

3. Slip the end that has been knotted securely onto the bow and twist it so the string is not resting on the bottom area of the recurve bow.

4. Turn the bow and lean it to a 45 degree angle and place the hook of the bottom half of the bow against you.

5. Press forward on the top of the bow with your right hand and lift the loop around the top of the bow with your other hand.

6. Let go of any force on the top part of the bow and then strep out of the bow. Scrutinize the top and bottom loops of the bow to make certain the string was properly secured.